Needone 48L

{tpc}

{tpc}

Professional Poker Tournament Loser
Joined
Feb 20, 2008
Messages
3,658
Location
Berkley, MI
So I picked up one of these yesterday used for $100. Heating and cooling unit I guess. Had it plugged in all night in the basement and it reads 70 on the nose, but honestly I haven’t put any other thermometer in it, just what the unit reports out itself.

Anyway, trying to determine how many beads I should use in this thing. It’s considerably larger than my old vinotemp unit, which basically runs at whatever the room temp is because the thermoelectrics decided that they need to keep everything at 54 degrees all the time, so I leave it unplugged.

I have two of these I’ve been using in the vino. Surely I need to use more, but how much more?

IMG_3880.jpeg
 
Does it need to have a fan? I know it has an internal one already. Wouldn’t an additional fan need to cycle on and off on some sort of schedule to be effective?
 
Ah didn’t realize it had a fan already. That should suffice. Just need to circulate the air a few times a day to keep your RH stable and even throughout the unit.
 
Pics pics pics.lol

I went with this old thread to determine how much beads.
V

Thread 'Humidification Beads: FAQs'

I have noticed recently that there seems to be a lot of questions about humidification beads. Some of the questions are repeated when new folks join this fine place. I was prompted by a fine BOTL, steamnjn23, to write up some information about the use, care and feeding of humidification beads so here goes.

Let’s start with the basics.

Humidification beads are a moisture sensitive silica material which absorbs and desorbs moisture in order to offset changes in relative humidity (RH) in your humidor. The beads are generally available preset to a specific RH, in the case of cigars 60%, 65%...
  • Like

hydro-terp

Thread 'So I got my new Wineador set up'

So I found this guy on CL outside of Philly for free because it doesn't cool any more. I exchanged emails and scheduled a pickup. It still runs and circulates air but I noticed the humidity takes a hit when you run it so I dont plan to plug it in.
20250618_163032.jpg
It is a two zone fridge with a divider in the middle. Since it is 2x+ bigger than my current setup I didnt think Oust fans would cut it so I sourced two fans.
20250618_163749.jpg
Fan

Then I had to figure out how to wire that up so I went with a splitter and a male to female wire into a 110 to usb adapter like you get with phone...
  • Like
  • Love
  • Wow

I decided to run my fans constantly. The humidity stabilizes very fast after digging out what I want. Like within a minute.

Personally I wouldn't rely on the built in temp/hygrometer. Get a govee that can be calibrated w a salt test. I plan do do mine every 6 months or so.

HT
 
Last edited:
You must log in or register to reply here.
Top