Q for Vinotemp Owners, 16 and 28 bottle.

[SamuraiJack]

Hi,

I am asking for a huge favor. If you have a 16 or 28 bottle Vinotemp thermoelectric wine cooler and tell me the internal dimensions of it, it would save me a lot of time and money. They are both 4 bottles across and 18.25" external width.

Thanks
-Alan

 

[B.HOBS]

Alan,

You can essentially subtract 1.75" from the external dimensions and have your rough internal H/W dimensions. The exception being the depth, as most coolers are only 13" deep internally, despite being 20" on the exterior. Good Luck. Im sure you will get a more precise response soon.

~Billy

 

[Pyth0s]

I used a 21 bottle one. (See NEW WINOHUMI Thread)

But like I stated, mine caught me off guard as the insulation inside is narrower at the back then in the front.

And as you go down I had to make a few drawers a little shorter as well to not block the fan.

All fridges are different, I just went with mine for it was all wood and not smoked glass.

Cheers!

Pyth0s

 

[wes888]

I'll take some measurements when I get home tonight.

 

[SamuraiJack]

I appreciate it wes.

 

[wes888]

14.5" wide x 13.5" deep x 24" high

 

[SamuraiJack]

Thanks Wes!

Oh and just for reference, is that that 28 or 16 bottle?

 

[wes888]

My bad, it's the 28.

 

[SamuraiJack]

Excellent. Thanks again.