Govee calibration question

[wilddul]

Just replaced a battery on one of my Govee hydrometers.
I cannot find on the app where to adjust/calibrate the temp/humidity.
Anyone care to help find it.

Thx.
Ive selected all parts of the app, no luck.

 

[cohibasurfer]

How to Calibrate in the Govee App

1. Open the App: Launch the Govee Home app on your device.
2. Select Sensor: Tap on the specific sensor you want to calibrate.
3. Access Settings: Find and tap the settings icon (usually a gear) in the upper right corner.
4. Choose Calibration: Select the "Calibration" option.
5. Adjust Values: Use the plus/minus buttons to adjust the temperature/humidity reading to match your known reference.
6. Save: Save the calibration; the device will then display the adjusted values.

 

[wilddul]

Calibration option is not there under settings.

 

[Eqwhipped]

Could not find a number, https://us.govee.com/support

 

[cohibasurfer]

Calibration option is not there under settings.

So when you go to the app. You pick the device. Then that opens . On the top right is a gear. click that. It should open and have:
Device name
Remote view
Device safety
Temp alarm
Relative Humidity alarm

Then Calibration
Temp - +
Hum -+

 

[hydro-terp]

This ^^^

FYI Ive done the salt test thing w mine but I now have a few Boveda packs in my RH that I will be using from here out after reading here about how RH is not linear since the salt test is 75.

HT

 

[hydro-terp]

If your still having trouble maybe disconnect the sensor from the app or reinstall the app and start over.

HT