Need Shelving for the vinotemp

[Golfanatic]

I purchased a vinotemp for a ridiculous low amount and posted about it a few weeks ago. Now that I have successfully filled two 100 ct. humi's I will need to begin this transformation.

I pmed Mtmouse about a week ago and am not trying to call him out, but I am anxious to get something started with this thing in case I get some nice xmas smokes from the family.

Does anyone know where I can buy some wood?/something to start to work on this vinotemp?

Thanks,
Darin

 

[tone-ny]

Use plastic wrapped metal shelving that you can get at Home Depot or Lowes. It's the middle of the Holidays, no one is going to PM you back :laugh: :laugh: :laugh:

 

[Golfanatic]

Use plastic wrapped metal shelving that you can get at Home Depot or Lowes. It's the middle of the Holidays, no one is going to PM you back :laugh: :laugh: :laugh:

thats a good idea. Is that something special or can I "do" something to the existing shelves that came with it? Also, I certainly expect mtmouse to make anything now but maybe pm back and say sure in February or something.

 

[LilBastage]

Did it not have shelves in it? You can use the regular shelves just fine. I do that and just use boxes to keep my smokes draped in cedary love. I also have a couple of trays from smaller humidors I use, too.

I've contemplated making drawers like others have shown (I even bought the cedar), but I'm not convinced I'll gain any space and that's the most important thing to me.

I bought the cedar at Woodcraft.

 

[tone-ny]

You remove the shelves that come with it and insert those. Remember measure twice cut once!

 

[Carbonless]

I purchased some shelves from MTMouse a short while ago and he mentioned that it would be the last set he was planning on making for a bit. They turned out very nicely, but it sure looks like it took quite a bit of work to get them done considering all of the orders that he was getting.

 

[LilBastage]

You remove the shelves that come with it and insert those. Remember measure twice cut once!

Am I missing something? Do the Vinotemps not have regular shelving in them? Is it that wavy stuff?

I have a Danby fridge that just has regular plastic coated wire shelving, so I don't know. :blush:

 

[bfreebern]

The Vinotemps should have about 6 metal racks that come with the unit.

 

[qballizhere]

I aslo used the metal shelving from home depot and works great. I got some ceadar from here http://www.internetlumber.com/Product/Prod...spanish%20cedar

 

[switters]

I bought a sheet of Luan from Lowes to make shelves for mine. It only cost about $10 for the sheet and few minutes of my time to cut the shelves and drill holes in them to allow a little air flow.