• Hi Guest - Come check out all of the new CP Merch Shop! Now you can support CigarPass buy purchasing hats, apparel, and more...
    Click here to visit! here...

Port Barrel Question

Macion Grey

the Libertine
Joined
Mar 2, 2008
Messages
1,374
Location
Australia
I picked up a quality 1 litre oak port barrel the other day, and have been having issues with the wooden tap.

Despite repeatedly filling the barrel with water to expand all the wood, the tap only slowed down to about 1 drip a minute, which quickly adds up to a big waste of liquid. I have been patient, attempting again and again to get the tap to close up.

My question is this: Is there any way to fix the drippy wooden tap? If not (most likely), where the hell can I get a brass tap from?
 
I would guess it depends on what type of tap you have. The original old style were literally "tapped" into the hole with a mallet using compression to hold the seal. If that is what you have then beeswax around the hole and tap it in again.

Pictures of your tap would help.
 
I just bit the bullet and ordered a brass tap replacement to fit the hole. Less fuss that way, but it was a pain finding a store that stocked one.

Already have my first test batch lined up: 12yr Hanwood Tawny, 10yr Grant Burge Tawny and Tariquet VSOP Armagnac. Should be good.
 
Wine barrels can take days, even a week or two to swell. I made wine for eighteen years.

- Rick


What can you tell me about the Port Making/Mixing process?

I wish to gain enough knowledge to blend my favourite red wines with my favorite Armagnac. Is it as simple as combining them in an oak cast and letting them sit?
 
This is a neat subject. I've never heard of anyone doing at-home port blending.

Definitely post more about this subject. Maybe even some pics. :thumbs:
 
Will do. I will post a picture when I my brass tap gets delivered, and it is all set up, and then when that batch is completed.

Then I will share my experiences with you and we can learn about it together. I am rather excited.
 
Well... the brass tap I ordered for my little barrel was a little big, but I have had no more annoying leaks so thats all fixed. I seasoned the now tightly sealed barrel with muscat for a couple of weeks, then rinsed it out and got straight into it.

So far, since the barrel is only 1 liter and has a high oak to spirit ratio, I have churned out 4 bottles of home blended/aged port.

The first one was a mix of a 12yr, 10yr port and some Armagnac. This took on the oak character of the barrel rather quickly, and only took two weeks before it acquired a stale taste from too much oak. I bottled it (hey... it was my first) and poured my new blend with 10yr old port and a little more armagnac. 3 weeks and it was already done, but much better than the first attempt. Very complex.

I realized that I was probably making a mistake using already aged ports and giving them more oakiness... so I picked up some young and fruity ports to blend. I also realized that this new barrel was going to take about another eight months to settle down properly and start giving me some more balanced results. Still, I pressed on and bottled my third bottle after another month (one month in a barrel this small is akin to 1.5yrs in a larger barrel), which was a sweeter and smoother bottle.

Starting to learn the ropes, I left some of the older blends in the bottom and topped the barrel up with a good quality, younger port. After 5 weeks, what came out was akin to a premium 12yr port: Rich and chocolatey... smooth and complex (without the staleness that had plagued my earlier attempts). Now that I know a bit more, I am confident I can start turning out ports totally suited to my tastes, which is something I cannot get at the stores.

What I have learned: Brandy may mix well with port in the process of it being made initially, but it does not do so well in re-barreling. Port barrels need to mature a while before delivering smooth results. Use younger ports as a general rule. Knowing how long a certain sized barrel can age your port before turning it stale is very important.
 
Great information Macion. I am waiting on two barrels now. Both are new American Oak with a medium char. I am going to use one for port and the other for bourbon. It was your original post that got me going on this. I can not wait for my barrels to arrive. Check out my blog at Visit My Website.

Johnny
 
Top