Grumpy1328
New Member
Ok, so I'm a newb and this is my first post, aside from my introduction.
I took up the cigar interest a few months ago, and I'm really enjoying it. I should be getting my first humi tomorrow.
I was smoking mostly machine made cigars and was very pleased. I then tried a Macanudo Hampton Court, which I enjoyed but found a little too mild. I tried a few more, then settled on Arturo Fuente Curly Head Deluxe. Bought a box, and the first few were quite good. Tonight, I lit one up and sat on the deck to enjoy a gin and tonic and a nice smoke. This one wasn't so hot. Or rather, too hot. The draw seemed way to tight, resulting in my having to puff harder than normal to get any smoke. Of course, the harder puffing resulted in a hotter smoke, the thing got bitter on me, and I was done with it only half way through. And the volume of smoke was very small. On the whole, a totally unsatisfying smoke.
So, a couple questions.
On some cigars, I use a punch. On this one, I used a regular cutter, and cut the head down as far as I dared, in an effort to ease the draw and get more smoke. Didn't work.
Could it be that this is normal for this cigar? Could I be cutting it incorrectly? My first thought was that it was "operator trouble" and not the cigar, but you never know.
Given that I have done the Macanudo and a couple of Arturo Fuentes (different models), does anyone have a suggestion on where I should turn now?
BTW, the machine mades I have been smoking and enjoying had a relatively light draw and had very good smoke volume. Loved the aroma and flavor, but I am thinking that there should be something out there even better.
Thanks for looking at the post, and I'm really enjoying the site so far.
I took up the cigar interest a few months ago, and I'm really enjoying it. I should be getting my first humi tomorrow.
I was smoking mostly machine made cigars and was very pleased. I then tried a Macanudo Hampton Court, which I enjoyed but found a little too mild. I tried a few more, then settled on Arturo Fuente Curly Head Deluxe. Bought a box, and the first few were quite good. Tonight, I lit one up and sat on the deck to enjoy a gin and tonic and a nice smoke. This one wasn't so hot. Or rather, too hot. The draw seemed way to tight, resulting in my having to puff harder than normal to get any smoke. Of course, the harder puffing resulted in a hotter smoke, the thing got bitter on me, and I was done with it only half way through. And the volume of smoke was very small. On the whole, a totally unsatisfying smoke.
So, a couple questions.
On some cigars, I use a punch. On this one, I used a regular cutter, and cut the head down as far as I dared, in an effort to ease the draw and get more smoke. Didn't work.
Could it be that this is normal for this cigar? Could I be cutting it incorrectly? My first thought was that it was "operator trouble" and not the cigar, but you never know.
Given that I have done the Macanudo and a couple of Arturo Fuentes (different models), does anyone have a suggestion on where I should turn now?
BTW, the machine mades I have been smoking and enjoying had a relatively light draw and had very good smoke volume. Loved the aroma and flavor, but I am thinking that there should be something out there even better.
Thanks for looking at the post, and I'm really enjoying the site so far.