Guns

[AVB]

It ain't how far the gun is supposed to shoot, It's how many rounds you put downrange trying to hit something at that distance.

When I could see, my toy of choice. It's good to 1,000 yards and so was I.

 

[MX]

Some Freedom weekend projects

First, reinstall the factory trigger in the Springfield Armory Ronin (9mm/CDR). Polished the trigger track and fitted the solid aluminum trigger, but something is off with engagement.. Get dry fires, hammer falls but no ignition, thumb the hammer back and will fire.

Second, install the Swampfox Sentinel II on the Springfield Armory Operator AOS (45 ACP/CDR) using the AOS plate with rear iron site.



Last, finish the pluck foam case for the 2 pistols and Mags. With that, do you guys have a preference over Plasti-dip vs Flex Seal? For finishing the foam?



Next up, getting my Rosie 38 Special to the shop, (revolver) not sure if it is a thing, but I think timing is off. This was my Mom's gun, and is nearly 50 years old. I need to really detail clean it....



Want to match it with a lever action in 357/38Sp, or, and I think I can do it move to 357 in the wheel gun.

Thanks
Tim

 

[hydro-terp]

With that, do you guys have a preference over Plasti-dip vs Flex Seal? For finishing the foam?


Thanks
Tim

I do not. I think I used flex seal on a case that holds my dogs GPS rig and it turned out OK....

My wife's company uses these guys when they kit out a case.

MyCaseBuilder Custom Foam - Pelican, SKB, Storm and others

If you need custom foam, you need MyCaseBuilder. Design your own custom foam case with our easy-to-use web application.

mycasebuilder.com

My garrison commander may be going back to the mothership. The edges on the front of the slide and frame are so sharp its shaving horsehide off my supertuck when you holster it. Are your Springer's like that?

HT

 

[MX]

I do not. I think I used flex seal on a case that holds my dogs GPS rig and it turned out OK....

My wife's company uses these guys when they kit out a case.

MyCaseBuilder Custom Foam - Pelican, SKB, Storm and others

If you need custom foam, you need MyCaseBuilder. Design your own custom foam case with our easy-to-use web application.

mycasebuilder.com

My garrison commander may be going back to the mothership. The edges on the front of the slide and frame are so sharp its shaving horsehide off my supertuck when you holster it. Are your Springer's like that?

HT

Not that I am aware of
I don't run them from a holster yet, yet.

The 9mm may never get pulled from one.

However, if there was a sharp edge my Brides delicate hands would have found it.

Going to the range tomorrow to test the trigger replacement