MX
Some may call me....Tim?!?
about time for me to add a 3rd tap, and a better drip tray...always something to spend $$$$ on
-
🔥 Light Up Your CigarPass Experience! 🔥
Get the CigarPass web app up and running in under a minute!
Dive in and unlock the full experience of the CigarPass community today!
📱 Follow the simple steps to install the app and join the community on the go!
📲 Get the App Now!Stay connected, share your passion, and never miss a puff! 💨
Freezerator Build (Keezer)
- Thread starter emoshun
- Start date
A drip tray that is strong enough to hold a full pint is something I've been wanting for a while now. Where are you getting yours from?
edit to add: I was considering this 5lb parts holder and just buy a grill and be done with it.
edit to add: I was considering this 5lb parts holder and just buy a grill and be done with it.
MX
Some may call me....Tim?!?
http://www.kegconnection.com/drip-tray-for-3-faucets-12-wide-with-drain/
mounts behind the faucets, and I planned mine to fit, knwing I was going to get it later
mounts behind the faucets, and I planned mine to fit, knwing I was going to get it later
MX
Some may call me....Tim?!?
Looks good!
I get a lot of my brewing things at HF.
I need to build an elevated rolling dolly to move around fermenters, so I dont have to run 20ft of hose to fill them.
Figure if I make it the same height as the shelf they sit on in the fridge, I can fill at the boil kettle then roll it to the fridge and slide it in.
Also, if I can find a way to jack it up about a foot it will make transfer from the fermenter to the keg faster.
I am sure HF has everything I need for this project.
T
I get a lot of my brewing things at HF.
I need to build an elevated rolling dolly to move around fermenters, so I dont have to run 20ft of hose to fill them.
Figure if I make it the same height as the shelf they sit on in the fridge, I can fill at the boil kettle then roll it to the fridge and slide it in.
Also, if I can find a way to jack it up about a foot it will make transfer from the fermenter to the keg faster.
I am sure HF has everything I need for this project.
T
Backslide
RASCClicious
Drakes Aroma Coma!!!!!!!! that's what you need!
Backslide
RASCClicious
I can make it happen Jimmy, so don't be a prick tease.
Looks like with Drakes I have to actually purchase the keg itself. Beer to Go
Backslide
RASCClicious
Wow, 70.00 for the keg is a steal! [emoji6] I really like when breweries do that. They don't expect the keg back that way! It allows me to buy a keg for cheap and fill it with homebrew.emoshun said:
2K6TBSS
Well-Known Member
Every time I see this thread pop up, it makes me want to finish my freezer that much faster. Maybe I will get some additional work on it this weekend.
That Drake's keg is a pretty good deal, and the best part is I drive by Drake's at least 3-4 times a week...
That Drake's keg is a pretty good deal, and the best part is I drive by Drake's at least 3-4 times a week...
2K6TBSS
Well-Known Member
I finally got around to getting mine almost finished.
Hopefully next week it will be up and running...
Hopefully next week it will be up and running...
That's awesome man!
I ended up ordering one of these babies to keep my shanks ice cold and put an end to the first glass having a tad too much foam.
Also since I started placing my Eva-Dry e-500's behind each fan, I've had no issues with moisture buildup!
Per this article
I ended up ordering one of these babies to keep my shanks ice cold and put an end to the first glass having a tad too much foam.
Also since I started placing my Eva-Dry e-500's behind each fan, I've had no issues with moisture buildup!
Per this article
MX
Some may call me....Tim?!?
Do you runthat always on?
I have an outlet in the coloer of my build that is switched by the temp controller, but it is not always on.
I have an outlet in the coloer of my build that is switched by the temp controller, but it is not always on.
I haven't installed the shank blower yet, but would probably have it on a timer.
I get home at 6, so it it turns on at 4:30 and cools until say 9:30 I'd be overjoyed with that. (I'd imagine 1.5hrs of pre-cooling shanks will be plenty)
I get home at 6, so it it turns on at 4:30 and cools until say 9:30 I'd be overjoyed with that. (I'd imagine 1.5hrs of pre-cooling shanks will be plenty)