Is there a V-Cutter you prefer to Xikar?

[lucasbuck]

After 11 years & thousands of cigars I think my Xikar is spent. The blades are dull & I’ve cracked the head of several cigars recently which really sucks. This is my favorite cutter by far and I use it almost exclusively. Have tried a couple others and they cut too deep for my preference. Any other shallow V-Cutters you like better than my beloved Xikar?

 

[George Scott]

I know you probably don't want to hear this, but switch to a punch

Clean and much less chance of damage. I've never had a draw problem with punching and I don't risk the chance of messing up the cut. These are the best tools and worth every penny: https://theperfecsmoke.com/products/perfecpunch-sup-tm-sup

IMHO of course!

 

[MX]

I like this one

XIFEI Cigar Cutter V-Cut Guillotine 3 in 1 Straight Cut V Cutter with

❤️【Superior Material,Precise Cut】➤The cigar cutter guillotine and V-cut blade is made of premium stainless steel.The blade is Ultra-Sharp, hard and rust-proof.Precision engineered blade angle provides optimal cut depth to penetrate small or large ring gauge cigars equally well.Cuts Up to 60 Ring...

xifeicigaraccessory.com

and the Lotus Jaws V

 

[whopper]

Cigarloong on Amazon

 

[BlindedByScience]

Short answer....no.

I've got a Colibri, and it's a fine, well made v-cutter.....but it takes a hell of a bite out of the cigar. Cool for Toros, etc, but the Xikar is my clear fave these days. Except for torpedos pretty much everything, big to small, falls into the Xikar.

My friend, after all the success...I'd buy another. One man's opinion.....

 

[George Scott]

Short answer....no.

I've got a Colibri, and it's a fine, well made v-cutter.....but it takes a hell of a bite out of the cigar. Cool for Toros, etc, but the Xikar is my clear fave these days. Except for torpedos pretty much everything, big to small, falls into the Xikar.

My friend, after all the success...I'd buy another. One man's opinion.....

I agree, if it worked for 11 years, get another one!

 

[hydro-terp]

Cigarloong on Amazon

This^

Mine will screw up a cap every once in a while but for the money its a solid buy. I clean it with rubbing alcohol and that usually solves the problem. Be sure to to do that when you buy it to....

I actually have the trifecta from Cigarloong. Lots of value there.

HT

 

[Thoughts]

WHY do I even look at these posts!!! (storming off to spend more money I don't need to spend...)

 

[CigarStone]

I know you probably don't want to hear this, but switch to a punch

Clean and much less chance of damage. I've never had a draw problem with punching and I don't risk the chance of messing up the cut. These are the best tools and worth every penny: https://theperfecsmoke.com/products/perfecpunch-sup-tm-sup

IMHO of course!

Maybe I just haven't had a good punch, because I never spent much, but they always seem to leave stuff under the cap that makes me bite and pick at the end of the cigar?

 

[lucasbuck]

Yeah you guys are right. Why mess with a good thing. I’ll just get another Xikar. Thanks all!

@MX - that cutter is tempting Tim! Thanks for the tip.

@George Scott - I have that nifty punch but have not tried it yet. I’m just not a punch guy but maybe I’ll try punching again.

 

[BlindedByScience]

I've got a nice sharp Xiker punch. It does what it's supposed to, but lately the Xikar V-Cutter gets all the mileage.....